This document has only the specific information about the device connection settings and its address syntax.

Refer to the User Guide for more information on the Device Module.


Summary

MitsubishiQ driver implements communication with Mitsubishi Serie Q devices on TCP/IP networks. The communications blocks are dynamically created according to the pooling cycle defined on the AccessType for each Device Point.

Communication Driver Information

Driver name

MitsubishiQ

Assembly Name

T.ProtocolDriver.MitsubishiQ

Assembly Version

1.0.6.0

Available for Linux

False

Devices supported 

Mitsubishi Serie Q devices

Manufacturer

Mitsubishi

Protocol

MELSEC

Interface

TCP/IP

Multi-threading

User configurable

Max number of nodes

User defined

PC Requirements

Ethernet port

Channels Configuration

Protocol Options

  • BlockSize: Defines the maximum amount of items per group, the default value is 255.
  • Format: Defines the MELSEC protocol format, default value is 3E.


Nodes Configuration

Station Configuration

Station syntax: <IP address> ; <Port number>

 Where :

  •  <IP address>: IP address of the Mitsubishi device in the network
  • <Port number>: TCP port where the Mitsubishi device is listening (default is 5001)

E.g.:  192.168.1.101; 5001


Points Configuration

The syntax for the MitsubishiQ communication points is: <Operand><Address>

Where:

  • <Operand>: indicates the memory area into the Mitsubishi device:
  • <Address>: indicates address to communicate.

Operand

Description

X

Input

Y

Output

M

Internal relay

L

Latch relay

B

Link relay

F

Annunciator

V

Edge relay

SM

Special relay

TS

Timer (contact)

TC

Timer (coil)

CS

Counter (contact)

CC

Counter (coil)

TN

Timer (present value)

CN

Counter (present value)

D

Data register

R

File register

SD

Special  register

 

E.g.: D500, Y05


Driver Revision History

MitsubishiQ Revision History

Version 

Notes

1.0.6.0

Initial release on new documentation standards.

In this section...

  • No labels