This document has only the specific information about the device connection settings and its address syntax.
Refer to the User Guide for more information on the Device Module.
Summary
WITS0Passive communication driver implements communication with server running WITS Level 0 communication. This driver runs only in listening information from the server.
| Communication Driver Information | |
|---|---|
| Driver name | WITS0Passive |
| Assembly Name | T.ProtocolDriver.WITS0Passive |
| Assembly Version | 1.0.12.0 |
| Available for Linux | False |
| Devices supported | WITS servers outputting Level 0 data streams |
| Manufacturer | |
| Protocol | WITS Level 0 Passive |
| Interface | TCP/IP, UDP or RS232 |
| Multi-threading | User defined |
| Max number of nodes | User defined |
| PC Requirements | Ethernet port |
NOTE
This driver supports any tag defined on target system.
Channels Configuration
Settings
- AcceptUnsolited Messages: Must be checked to enable this driver
- Listening Port: Listening port the TCP or UDP messages
Nodes Configuration
Address
The address is necessary, as this driver works in listening mode only. When connecting to multiple devices, multiple channels shall be defined.
Points Configuration
The syntax for the communication point is: RecordID:ItemID
Where:
- RecordID and ItemID ranges from 01 to 99, according WITS Level 0 record definition: http://home.sprynet.com/~carob/ - recs
Driver Revision History
| WITS0Passive Revision History | |
|---|---|
| Version | Notes |
| 1.0.12.0 | Initial release on new documentation standards. |
In this section...