You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Introduction

This document presents the HTML5 displays and accessing over the web. This application requires the software version 2016.2.X or newer. When installing the software the HTML5 features will be available to use in any project. HTML5 displays can be access in any web browser.

Configuration

Step 1: Open a project and go to Draw>Drawing. Click in the “Close Display and create a new one” icon to create a new display. Select the “HTML5 Client” option before clicking in the Ok button. See the picture below:


Step 2: Draw your display as you desire.


Step 3: Go to Run section and Start up the project. After starting it up, check the in the Windows tray bar the TServer icon the HTML5 port. See the picture below:

Attention

You must use a WebServer for access the HTML5 display. You can use the TWebServer, which one is installed with the product, or the Windows Internet Information Services (IIS).

Step 4: Open the web browser and use the URL syntax below:

http://<Server IP Address>/fs-2016.2/HTML5/index.html


  • No labels