Overview
When integrating Siemens S7 PLCs with software platforms or HMI/SCADA systems, it's common to configure communication settings to ensure proper data transfer between devices. This process specifies parameters like the PLC's IP address, rack, slot, and port.
On this page:
Importing Procedure
To import tags from these devices, follow the steps:
- Navigate to the Solution Import Tags interface;
- Double-click on the desired Import Tag Wizard;
- Then you must provide the parameters.
Here's an brief description of each parameter:
Siemens s7 Family | |
---|---|
Station IP | The Siemens PLC's IP address |
Rack | The 'Rack' parameter specifies which frame or rack the target module is in in a multi-rack configuration. In many simple configurations, this is often 0, as there's only one rack. |
Slot | Identifies the exact slot where the specific module, like the CPU, is placed within the rack. |
Port | For Siemens S7 communication, the usual network port number employed is port 102. |
S7 Family | Specify the PLC model, either Model 300/400 or Model 1200, to ensure the appropriate communication methods and protocols are applied. Model 300/400: The S7-300 and S7-400 are traditional, modular PLCs known for their flexibility and use in more complex automation systems. They often utilize the PROFIBUS or PROFINET communication protocols, depending on the specific modules and configurations in use. Model 1200: The S7-1200 is part of Siemens' newer generation of PLCs. It's more compact and designed for small to medium automation tasks. It primarily uses PROFINET for communication. |
In this section: