Licensing and Activation

About Express Projects

When you install the product, you can only edit and run Express family projects until your computer is licensed. 

The Product Family Express is a useful option when you want to create Project examples and demos to be shared with users that not necessarily will have a product license.

To license your computer, you need to either use a physical dongle (hard key) or create a softkey license, as described here.

Licensing Methods

Hardkey

A hardkey license is stored in a flash drive that is sent to the client. The advantage of using a hardkey is that the license is not linked to a single computer like it is with softkey licenses. 

If the flash drive goes missing, a new license must be acquired. There is no replacement. 

Softkey

The softkey license is generated by the equipment SiteCode. In order to obtain this file, do the following steps:

• Go to the Welcome page → License tab and click Get site code.
• Send the generated file to a Tatsoft employee, and they will generate a license key.
• Click the Load license key button on the License tab to load the received key.

Online Activation

With the online activation, a softkey license is generated, which is not linked to a computer.

The advantage of using an online activation license over the regular Softkey license is that it can be deactivated and reactivated in order to switch equipment.

To activate a license, go to the Welcome Page → License tab and click the OnlineActivation button. Enter your SerialNumber and ActivationCode in the popup window that appears. 

License Types

Engineering and Runtime

Users are allowed to both edit and run a Project.

Runtime

Users are not allowed to edit a Project. However, the ‘.tproj’ file can run without limitations.

A project can be edited even if it is located on equipment licensed for RuntimeOnly. To do so, a product with an Engineering license can perform a remote connection to the RuntimeOnly (through the Welcome Page → Server Tab). That way, a single Engineering license can edit multiple projects deployed on site. 

Developer

A Developer license is only used for specific project development on site. 

Using a developer license is not recommended when the product is installed in local machines due to the short expiration date; it is set to expire 1 to 2 days after activation. 

License - Product Model and Family

The number of Max Communication Points available for a project can be changed according to the license type.

The existing licenses types are:

• FrameworX
• FactoryStudio
• EdgeHMI
• EdgeGateway
• Express

The current License type, designed Product Family, and Product Model can be found in the License Tab.

There are many communication protocols available regardless the license.

However, some communication protocols must be acquired separately, such as OSIsoft PI and DNP 3.0.

Procedures to Migrate or Kill a License

 Migrating from One Computer to Another

• Send the SiteCode file from the original computer.
• The SiteCode will be processed, and you will receive a temporary license to install on the original computer.
• Install the temporary license on the original computer.
• After installing the temporary license on the original computer, generate and send the SiteCode file from the original computer again. This verifies that the temporary license has been installed properly.
• Generate and send the SiteCode file from the new computer.
• The SiteCode will be processed, and you will receive the license for the new computer.
• Install the new permanent license on the new computer.

Migrate a Softkey to Hardkey License

• Send the SiteCode file from the computer.
• The SiteCode will be processed, and you will receive a temporary license to install on the original computer.
• Install the temporary license on the computer.
• Attach the USB LicenseKey to the computer.
• Generate and send the new SiteCode file after the temporary license has been installed.
• The SiteCode will be processed, and you will receive a LicenseKey file for you to load onto the computer with the USB LicenseKey.

Killing a License

• Send the SiteCode file from the computer.
• The SiteCode will be processed, and you will receive a temporary (3-10 days) license to install on the original computer.
• Install the temporary license onto the original computer.
• After installing the temporary license on the original computer, generate and send the SiteCode file from the original computer again. This verifies that the license has been killed properly.

In this section...