You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Introduction

Use this section, which uses the "Info" format and we've titled "Introduction", to list a short "Introduction" about what this use case is. 

Goals

Explain the use case. Example: you're trying to build a factory line using tags and symbols.

(Isabela note: would something like this be a good example?

https://www.dmcinfo.com/latest-thinking/blog/id/10345/categoryid/66/dynamically-creating-stations-and-tags-in-ignition

https://www.dmcinfo.com/latest-thinking/blog/id/10306/categoryid/66/visualizing-cam-profiles-for-siemens-comfort-panels

https://www.dmcinfo.com/latest-thinking/blog/id/10253/categoryid/66/creating-dynamic-ignition-perspective-projects-part-4-parameters-indirect-bindings-and-flex-repeaters)


Components (not sure it's the best Word) Used

What are the main product sections/modules involved in creating this. Example: https://openautomationsoftware.com/use-cases/opc-wpf-scada/

Always link to the User Manual page that describes it.


Step-by-Step

Go through the steps to build this.


Add tips when it makes sense.

Troubleshooting

If something goes wrong, what do I do?


Advanced Configuration

When there's advanced configuration available, explain that. Does it envolve scripting?


In this section...

The root page @parent could not be found in space 93Draft.


  • No labels