This document has only the specific information about the device connection settings and its address syntax.
Refer to the User Guide for more information on the Device Module or on UNS TagProvider Connections.
On this page:
Summary
Communication Driver Information | |
|---|---|
Driver name | LCP IC - Local Control Panel Interface Control |
Assembly Name | T.ProtocolDriver.LCPIC |
Assembly Version | 1.0.0.0 |
Available for Linux | True |
Devices supported | |
Manufacturer | |
Interface | Serial |
Protocol | TCP/IP |
PC Requirements | Ethernet port |
Configuration
All initial configurations for devices in the solutions on the software platform encompass the following workflow:
Defining a Channel using a target communication Protocol creates the base instance for linking a Node. Learn more at Devices - Channels.
Defining the Node linked to the created Channel. Learn more at Devices - Nodes.
Defining the Point that you would like to monitor. Learn more at Devices - Points.
Protocols define communication rules between the platform and devices. Channels define global parameters for using a communication protocol. Nodes represent physical field devices (like a PLC) with a unique field address (PrimaryStation). Points represent tags within a device. Additionally, AccessType defines how the device interacts with the platform (Read and/or Write). Learn more at Devices - AccessType.
Channels
Nodes
Points
AccessTypes
Driver Revision History
LCP IC Driver Revision History | |
|---|---|
Version | Notes |
1.0.0.0 | Initial release on new documentation standards |
In this section: