This document has only the specific information about the device connection settings and its address syntax.
Refer to the User Guide for more information on the Device Module.
Summary
Communication Driver Information | |
|---|---|
Driver name | AB ENI |
Assembly Name | T.ProtocolDriver.ABENI |
Assembly Version | 1.0.0.1 |
Available for Linux | False |
Devices supported | PLC Allen-Bradley MicroLogix 1761 - NET-ENI |
Manufacturer | Rockwell |
Protocol | AB_ENI |
PC Requirements | Ethernet board |
Channels Configuration
Protocol Options
This configuration is not supported for this Driver.
Nodes Configuration
Primary Station
Station syntax: <IP > ; <Port >
Where:
<IP> = IP address of the slave device in the AB network
<Port> = TCP port where the slave device is listening (default is 44818)
E.g.: 192.168.1.1 ; 44818
Points Configuration
Address
The syntax for the AB ENI communication points are:
- <FileType><FileNumber>:<ElementNumber><Parameter>
Where <FileType> indicates the memory area, the valid values are:
- N, for Integer
- B, for digital
- F, for real
- S, for statur
AB ENI Address Types | ||||
|---|---|---|---|---|
Type | Read | Write | Data Type | Address size |
N | Yes | Yes | Word | 2 bytes |
B | Yes | Yes | Word | 2 bytes |
F | Yes | Yes | Single | 4 bytes |
S | Yes | Yes | Word | 2 bytes |
<FileNumber> indicates the data address for the chosen file
<ElementNumber> indicates the address from the specific file which will read and/or write from PLC.
<Parameter> indicates the parameter that composes the ElementNumber.
E.g.:
- F8:0
- N7:1
- B3:10/1
Driver Revision History
AB ENI Revision History | |
|---|---|
Version | Notes |
1.0.0.1 | Initial release on new documentation standards |
In this section...