Overview
Enumerations allow you to associate numeric tag values with descriptive text strings, enhancing data presentation in displays. Tags linked to an Enumeration Set can display either the numeric value or its descriptive text equivalent.
On this page:
Defining Enumerations
- Navigate to Unified Namespace → Enumerations.
- On the toolbar of DataGrid, click on the "Insert New" button to create a new enumeration.
- Insert a descriptive name for your new enumeration in the name field.
- Finally, define the enumeration values along with their respective display texts.
Enumerations Examples on Electrical Systems
| Name | Values | Display Text | Description |
|---|---|---|---|
EnumPower | 0 | Unpowered | Unpowered: The system or device is not receiving power. |
1 | Powered | Powered: The system or device is receiving power. | |
EnumCmd | 0 | Enable | Enable: Enables the system. |
1 | Disable | Disable: Disables the system. | |
EnumOpenedClosed | 0 | Opened | Opened: Circuit is open. |
1 | Closed | Closed: Circuit is closed. | |
EnumOpenClose | 0 | Open | Open: Command to open the circuit. |
1 | Close | Close: Command to close the circuit. | |
EnumManualAuto | 0 | Manual | Manual: System is in manual mode. |
1 | Auto | Auto: System is in automatic mode. | |
EnumActivateDeactivate | 0 | Activate | Activate: Activate the system or feature. |
1 | Deactivate | Deactivate: Deactivate the system or feature. | |
EnumOnepoleThreepole | 0 | One-pole | One-pole: Single-phase connection. |
1 | Three-pole | Three-pole: Three-phase connection. | |
EnumNormIntermTransf | 0 | Normal | Normal: Operating in standard conditions. |
1 | Intermediary | Intermediary: Operating in an intermediary state. | |
2 | Transferred | Transferred: The component has been transferred to a different state. | |
EnumLocalRemote | 0 | Local | Local: Controlled locally. |
1 | Remote | Remote: Controlled remotely. | |
EnumIntermOpenClosedInconsist | 0 | Open | Open: Circuit is open and inconsistent. |
1 | Closed | Closed: Circuit is closed but inconsistent. | |
EnumUnblockedBlocked | 0 | Unblocked | Unblocked: System is unblocked. |
1 | Blocked | Blocked: System is blocked. | |
EnumUpDown | 0 | Up | Up: Direction is up. |
1 | Down | Down: Direction is down. | |
EnumParallelIndividual | 0 | Parallel | Parallel: Running in parallel. |
1 | Individual | Individual: Running individually. | |
EnumStopStart | 0 | Stop | Stop: Stop the system. |
1 | Start | Start: Start the system. | |
EnumOnOff | 0 | Off | Off: System is turned off. |
1 | On | On: System is turned on. | |
EnumNormalActed | 0 | Normal | Normal: System is operating normally. |
1 | Acted | Acted: System has acted on a command or event. | |
EnumBlockedUnblocked | 0 | Blocked | Blocked: System is blocked. |
1 | Unblocked | Unblocked: System is unblocked. | |
EnumRemoteLocal | 0 | Remote | Remote: Controlled remotely. |
1 | Local | Local: Controlled locally. | |
EnumActivatedDeactivated | 0 | Activated | Activated: System or feature is activated. |
1 | Deactivated | Deactivated: System or feature is deactivated. | |
EnumTicketColor | 0 | Red | Red: High priority. |
1 | Green | Green: Low priority. | |
EnumVisible | 0 | Visible | Visible: Can be seen. |
1 | Invisible | Invisible: Cannot be seen. | |
EnumTypeConnector | 0 | Delta | Delta: A three-phase connection in a closed loop. |
1 | Wye | Wye: Each phase connected to a central neutral point. | |
2 | WyeGrounded | WyeGrounded: Wye connection with grounded neutral. | |
EnumReclosing | 0 | Single | Single: Single reclosing operation. |
1 | Auto | Auto: Automatic reclosing operation. | |
EnumTurnedOnTurnedOff | 0 | Turned On | Turned On: Device is turned on. |
1 | Turned Off | Turned Off: Device is turned off. |
In this section: