Page History

...

To install the “WebGateway”, run the “InstallTWebGatewayService.exe” application. All the used information for the WebGateway is in the TWebGatewayService.exe.config.  It This will create a window services windows service and all output will be sent to the windows event viewer. After any modification in to the .config file, the windows service must be stopped and startedrestarted.

Using Additional Ports

When using additional ports (ExtraCount parameter), you need to configure the TWebGatewayService.exe.config file, and then execute the WebGateway installation. The executable “InstallTWebGatewayService.exe” will verify the TWebGatewayService.exe.config and install the additional ports on the Windows routing table. Then, after After you make modifications to the related additional ports, you must follow the steps below: 

...

The available WebGateway parameters can be found in the list below:

LocalPort : WebGateway listening port. If you are ONLY using Windows Authentication, set it the parameters to zero (0) and the port will not be opened

LocalPortWA: WebGateway listening port using Windows Authentication. If you are not using Windows Authentication, set it the parameters to zero (0) and the port won’t will not be opened

RemoteIP : Computer IP that runs the runtime server (TServer.exe)

...

RemotePortWA: “TServer.exe” listening port using Windows Authentication

WA:  Force to   Must use either RemotePort or RemotePortWA. Do It does not matters matter which port the data arrive arrives in (LocalPort or LocalPortWA)

...

             False = Disabled

TargetCF : [optional] Set if the project is being  This enables a project to be deployed in a Compact Framework environment (WindowsCE) or not.

     True = Enabled

     False = Disabled.

...

LocalPort2: WebGateway listening port. It must start in with #2.

RemoteIP2:  Computer IP that is running the runtime service

...

...

When the WebGateway service is started, log messages can be found are in the Windows EventViewer.You should be able to find among the messages one as in

the example. Below is a message similar to one of the log messages.

First redirect :: LocalPort: 3101, RemoteIP: localhost, RemotePort: 3101,RemotePortWA: 3102 
Extra Redirection Table:
Listen on ipv4:	Connect to ipv4:

Address	Port	Address	Port
---------------    ----------	--------------- ---------- 0.0.0.0	3100	192.168.80.129	3100
0.0.0.0	3102	192.168.80.129	3101

...