Connecting a Kepware Client to an OPC UA server involves establishing a communication link that adheres to the OPC UA standard. It involves managing security certificates, defining connection details within Kepware, and importing the OPC UA server's tag structure. Configuration needs the certificate exchange, specifying server endpoints, and adding relevant tags.
On this page:
| Table of Contents | ||||
|---|---|---|---|---|
|
System Requirements
To make use of this feature, the following system requirements need to be matched.
- KepServerEx V5 (or superior).
- OPC UA Protocol
On this page:
How to Use
The procedure for a successful OPC UA connection is divided into three main steps.
- KepServerEx OPC UA Client Certification
- Creating certificates for the OPC Server
- Kepware OPC Client Configuration
KepServerEx Client Certificate
In the Kepware OPC UA Configuration Manager, go to Instance Certificates(1). In the Client Certificateportion, click Export Client Driver Certificate...(2), and save the file in any folder you want.
OPC UA Server Configuration
Navigate to the Info → Settings tab, locate the OPC Server Runtime configuration, select OPC UA, and click on Settings (1).
You should see an application called UA Server Configuration Helperopening up. Click Browse (2)and search for the file .. fs-9.1uaPLUS.Net4.exe. Then, click Create UA Configuration(3)followed by Edit UA Configuration (4).
The Edit UA Configurationpage is where the OPC UA Server properties are configured, such as Endpoint(1), Security Policies (2), and Certifications(Client and Server) (3).
In the certificate popup, click Import a Client Certificate (4)and browse for the Kepware Client Certificate. Then, in Create a new self signed server certificate (5), give it a friendly name, and click Create.
Finally, click Export (6)to save the Server Certificate. Click OK → Save And Close → Done
KepServerEx Configuration
In the KepServerEX Configuration display, right-click Connectivityand select New Channel. From the Channel Wizard popup, browse for the OPC UA Client.
Fill in the Wizard configuration with the information from the OPC Server.
Click Add Device (1)and name it. Fill in all the device parameters until you reach the Import Items (2) page.
The import tool WILL NOT work right now because the OPC Server (Project) is not running yet. Click Advance (3)and finish your configuration.
Importing Server Certificate
Back in the OPC UA Configuration Manager, go to the Trusted Servers (1) tab and Import (2) the OPC Server certificate.
Reinitialize the Kepware service and run your project.
Project Runtime
Once the configuration is done, you can launch the Project to test the communication exchange. Remember to have the OPC Server Module enabled on Runtime → Startup.
You can now go to your Kepware Device and Browse for the existing Tags.
| Note |
|---|
The Tags Visibility property (onEdit → Objects) must be configured according to the description below: |
- Public: Can be read and write in your OPC
- Protected: Can only be read
- Private: will not be seen or browsed
In the Advosol UAplus Server popup, you can monitor the clients currently connected to your server. As shown in the image below, we have one client (Kepware’s OPC Quick Client) that is successfully communicating with our Project.
In this section...
| Page Tree | ||||
|---|---|---|---|---|
|