Overview
This document explains how to configure the License Server to share licenses over a network.
On this page:
License Server Configuring
On the Server side
Requirements
1. The Server computer must have the software platform installed and licensed.
2. The software must have applied license for the remote license server allowing a field higher than 1.
2.1. To check how many licenses are available, open the software and go to the License display, and check the Serial Number field as shown in the image below:
For more information about how to get a license key, access Managing Licenses and read more.
Running the web server
1. The first step for the server computer to be ready to accept remote connections from clients is to have a WebServer running.
A web server is an interface application used to manage the connection between computers in a network. The TWebServer is our software platform's connection assistant. To connect other computers in the same network with the project server, you need the TWebServer connection assistant or a similar tool, such as Microsoft Web Server (IIS - Internet Information Services).
1.1. To run TWebServer, you must access the software platform installation folder (default path: "C:\Program Files (x86)\Tatsoft\FrameworX") and open the TWebServer.exe file.
1.2. To check if the TWebServer is running:
A. You can open the Windows tray icons, close the Windows clock, and look for the TWebServer icon as the executable file icon, the same icon as the image above. When found, position the cursor over the icon, and a similar message "TWebServer is running...(Port: <Port>)" appears. The image case below appears (Port: 80), meaning port 80 (default) has been used for the WebServer. But, if another program uses that port, it is common to appear the 3100 number.
B. Or, you can go to the Task Manager window and look for the "FactoryStudioTWebServer" service in the Service tab.
If this does not appear, the TWebServer was not installed as a Service.
On the client side
Requirements
The client computer must have the software platform installed.
Client-side setup
1. To do the configuration on the client-side, you must have the "RemoteLicenseService” text file.
A. To create one, open a new file in Notepad and write the following line:
RemoteServer=<Server IP>:<Server Port>
B. Save the file with the name “RemoteLicenseService.config” on your computer's Desktop.
C. Open the file and replace the specified parameters. Change the IP and port for the license server configuration. The IP is the IP of the computer's server, and the Port is the port we discovered in the last section (in this case, 80).
For example:
D. Save the changes made to the file (Ctrl + S).
E. Put the file in the following folder: “C:\ProgramData\FactoryStudio\.”
2. Open the software, access the License display, and refresh the page in the lower right corner.
3. See if the License is enabled, as shown in the image below:
In this section: