This document has only the specific information about the device connection settings and its address syntax.
Refer to the User Guide for more information on the Device Module.
Summary
| Communication Driver Information | |
|---|---|
| Driver name | IPC |
| Assembly Name | T.ProtocolDriver.IPC |
| Assembly Version | 1.0.0.8 |
| Available for Linux | False |
| Devices supported | Filmex and Varex extrusion |
| Manufacturer | IPC |
| Protocol | Proprietary over TCP/IP |
| PC Requirements | Ethernet port |
Nodes Configuration
Station Configuration
Station syntax: <IP Adress> ; <Port>
Where :
- <IP Address>: IP address of the device
- <Port>: IP port of the device. Default port is 1505
E.g.: 192.168.1.1; 1505
Point Configuration
Address
The syntax for the communication points is: DB<Number>:<Word>
Where:
DB=Data Blocks.
- <Number>: is the group number of the configured Data Block.
- <Word>: is the word address.
E.g.: DB10:5
Driver Revision History
| IPC Revision History | |
|---|---|
| Version | Notes |
| 1.0.0.8 | Initial release on new documentation standards. |
In this section...