You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

The EdgeGateway integration with  Cisco Routers reads data from PLCs and publishes it to MQTT Brokers using the SparkplugB specification. This integration allows for data collection from industrial devices, transformation, and network transmission.

Deploying the Linux-based software platform on the router extends its utility beyond data publication to include network management and integration functionalities.

Key Features:

Data Collection: Reads data from PLCs, including Rockwell ControlLogix.

MQTT Publishing: Uses SparkplugB for structured data exchange.

Extended Scripts Functionality: the built in Scripts module, allows to run in the device sutomization code, for data normalization and other requirements. 

Manageable distributions: Docker distribution deployment for easier management and integration.

On this page:


System Requirements

To use this feature, the following system requirements need to be met.

  • Cisco Router, model IR1101.
  • *.tar file, containing the docker image with the application to be installed.
    • iox-edge-gateway-Arm64.tar, if your Router's processor is ARM.
    • iox-edge-gateway-X86.tar, if your Router's processor is x86.
  • Allen-Bradley/Rockwell - ControlLogix PLC / Micro800.
  • MQTT Broker with support to SparkPlugB specification.
  • Windows computer with installation files for FrameworX.

Functionality Overview

The EdgeGateway application consists of a docker image that contains a ProjectServer application, which is a server that allows your FrameworX Designer on Windows to connect to it and deploy the necessary files to run any project in Linux (or Cisco in this scenario).

By having the full FrameworX capabilities running inside your Cisco Router, you will have access to many Communication Protocols (e.g.: MQTTspB, ControlLogix, Modbus, etc) as well as scripting (to make calculations based on the data being exchanged through your devices).

One example of a program behavior is illustrated as per image below.

EdgeGateway on Cisco Routers, getting data from ControlLogix, publishing to MQTT

Despite being deployed in a docker container, known to have volatile memory (that is not retained), this EdgeGateway application makes use of a retentive memory area inside the Router to store the installation and Project Files.

Installing and Deploying Apps

The first step is to make sure you have downloaded the *.tar with support to your Router's processor. Then, choose one of the following ways to install the application.

Using Cisco Local Manager

Cisco Local Manager is a platform-specific application that is installed on a host system as part of the installation of the Cisco IOx framework on that device. It provides a web-based user interface that you can use to manage, administer, monitor, and troubleshoot apps on the host system, and to perform various related activities.
For more information about it, please refer to the Cisco official documentation. To install and deploy your application, follow the procedure below.

  • Go to Applications Tab in the Menu Bar.

  • Click Add New.

  • Select the *.tar file and enter a friendly name to the Application. It will be used as an Identifier.

  • Click Activate to activate the app.

Below you will find some definitions for terms frequently used when dealing with applications in Cisco Environment:

  • Deployed: Means the Application has been imported.
  • Activate: Reserves host system resources that the app requires to run, designates the network from which the app obtains its IP address, and assigns host system serial ports for use by the app, if requested.
  • Start: Starts the app container for the app on the host system. CPU and memory (RAM) resources that were reserved for the app become in use.

Using Cisco IOx Client

For this procedure, you must have IOx Client installed on your environment.
The official installation guide and documentation for IOx Client is available here.

  • Launch the IOxClient.exe in your OS command line terminal. It is easier if you add it to PATH and run the terminal from the same folder as your *.tar file.
  • If your IOxClient does not have a profile connected to the Router already, do as follows:
ioxclient profiles create
// here you will connect to the Router
// values inside brackets will be used by default if empty

Your / your organization's name : <OrganizationName>
Your / your organization's URL : <OrganizationUrl>
Your IOx platform's IP address[127.0.0.1] : <RouterIPAddress>
Your IOx platform's port number[8443] : <RouterPortNumber> 
Authorized user name[root] : <UserName>
Password for <UserName> : <PasswordForUser>
Local repository path on IOx platform[/software/downloads]: <Repository> 
URL Scheme (http/https) [https]: <TransferProtocol>
API Prefix[/iox/api/v2/hosting/]: <ApiPreffix>
Your IOx platform's SSH Port[2222]: <SshPortForRouter>
  • Run the following commands to install, activate and start the package:
ioxclient application install <AppName> <PackageName>.tar 
ioxclient application activate --payload activation.json <AppName> 
ioxclient application start <AppName>

Where AppName is a friendly name used to identify the application inside the Router.

  • Use the following commands to stop/disable and uninstall the application:
ioxclient application stop <AppName> ioxclient application deactivate <AppName>
ioxclient application uninstall <AppName> <PackageName>.tar

Use the following command to see the application status

ioxclient application status <AppName>

Deploying Projects

For those who are familiar with Project Deployment in Linux Environments, this will be the exact same procedure.

With the Cisco application running, open your FrameworX's Welcome app and navigate to Server Tab. 

Under ProjectServer click on Remote and enter your Cisco's IP Address (syntax: http://<IpAddress>:3100/)  and click on Connect.

Now click on Update to upload the files for the Runtime. A popup will open asking if you want to copy all files or just the new ones.



If you already have a Project created, click on Upload Project to send it to the Router. If you don't, then a new Project must be created in your Windows Environment to be uploaded to Cisco (meaning that you willl have to disconnect from the router, create a new Project that reconnect and upload it).  

Only EdgeGateway Projects are allowed to run under the Cisco License, as it can be seen in the License Tab.

Make sure that projects uploaded to Cisco have the correct Product Family and Target Framework.

Finally, all we have to do now is configure our Project with the desired Communication Protocols to have our gateway working.

Troubleshooting

App was missing at Least one interface

If you encounter this error, it means that your router is missing a network configuration for applications. To solve it, follow the procedure described at Configure a VirtualPortGroup to a Layer 3 Data Port section.
Connect to your Router via SSH (either via terminal or in Cisco Local Manager) and do as follows.

In this section:

Error rendering macro 'pagetree'

null

  • No labels