Overview
Enumerations allow you to associate numeric tag values with descriptive text strings, enhancing data presentation in displays. Users define these sets (value-text pairs) in Unified Namespace → Enumerations. Tags linked to an Enumeration Set can display either the numeric value or its descriptive text equivalent.
On this page:
Defining Enumerations
- Navigate to Unified Namespace → Enumerations.
- On the toolbar of DataGrid, click on the "Plus" button to create a new enumeration.
- Insert a descriptive name for your new enumeration in the name field.
- Finally, define the enumeration values along with their respective display texts.
Enumerations Examples on Electrical Systems
| Name | Values | Display Text | Description |
|---|---|---|---|
EnumPower | 0 | Unpowered | Unpowered: The system or device is not receiving power. |
1 | Powered | Powered: The system or device is receiving power. | |
EnumCmd | 0 | Enable | Enable: Enables the system. |
1 | Disable | Disable: Disables the system. | |
EnumOpenedClosed | 0 | Opened | Opened: Circuit is open. |
1 | Closed | Closed: Circuit is closed. | |
EnumOpenClose | 0 | Open | Open: Command to open the circuit. |
1 | Close | Close: Command to close the circuit. | |
EnumManualAuto | 0 | Manual | Manual: System is in manual mode. |
1 | Auto | Auto: System is in automatic mode. | |
EnumActivateDeactivate | 0 | Activate | Activate: Activate the system or feature. |
1 | Deactivate | Deactivate: Deactivate the system or feature. | |
EnumOnepoleThreepole | 0 | One-pole | One-pole: Single-phase connection. |
1 | Three-pole | Three-pole: Three-phase connection. | |
EnumNormIntermTransf | 0 | Normal | Normal: Operating in standard conditions. |
1 | Intermediary | Intermediary: Operating in an intermediary state. | |
2 | Transferred | Transferred: The component has been transferred to a different state. | |
EnumLocalRemote | 0 | Local | Local: Controlled locally. |
1 | Remote | Remote: Controlled remotely. | |
EnumIntermOpenClosedInconsist | 0 | Open | Open: Circuit is open and inconsistent. |
1 | Closed | Closed: Circuit is closed but inconsistent. | |
EnumUnblockedBlocked | 0 | Unblocked | Unblocked: System is unblocked. |
1 | Blocked | Blocked: System is blocked. | |
EnumUpDown | 0 | Up | Up: Direction is up. |
1 | Down | Down: Direction is down. | |
EnumParallelIndividual | 0 | Parallel | Parallel: Running in parallel. |
1 | Individual | Individual: Running individually. | |
EnumStopStart | 0 | Stop | Stop: Stop the system. |
1 | Start | Start: Start the system. | |
EnumOnOff | 0 | Off | Off: System is turned off. |
1 | On | On: System is turned on. | |
EnumNormalActed | 0 | Normal | Normal: System is operating normally. |
1 | Acted | Acted: System has acted on a command or event. | |
EnumBlockedUnblocked | 0 | Blocked | Blocked: System is blocked. |
1 | Unblocked | Unblocked: System is unblocked. | |
EnumRemoteLocal | 0 | Remote | Remote: Controlled remotely. |
1 | Local | Local: Controlled locally. | |
EnumActivatedDeactivated | 0 | Activated | Activated: System or feature is activated. |
1 | Deactivated | Deactivated: System or feature is deactivated. | |
EnumTicketColor | 0 | Red | Red: High priority. |
1 | Green | Green: Low priority. | |
EnumVisible | 0 | Visible | Visible: Can be seen. |
1 | Invisible | Invisible: Cannot be seen. | |
EnumTypeConnector | 0 | Delta | Delta: A three-phase connection in a closed loop. |
1 | Wye | Wye: Each phase connected to a central neutral point. | |
2 | WyeGrounded | WyeGrounded: Wye connection with grounded neutral. | |
EnumReclosing | 0 | Single | Single: Single reclosing operation. |
1 | Auto | Auto: Automatic reclosing operation. | |
EnumTurnedOnTurnedOff | 0 | Turned On | Turned On: Device is turned on. |
1 | Turned Off | Turned Off: Device is turned off. |
In this section: