There are 2 independent ways to use this protocol: Using a TagProvider; or as a DeviceChannel in the Module Device.
- TagProvider: allows to use of the PLC addresses directly without creating any Tags nor mappings in the Project.
- DeviceChannel: create Project Tags and map to the PLC addresses, allowing more control over names and data blocks. Use the Import Tags to setup automatically the mapping.
This document has only specific information about the device connection settings and its address syntax.
Refer to the User Guide for more information on the Device Module or on External TagProviders.
Summary
| Communication Driver Information | |
|---|---|
| Driver name | TTagsSender |
| Assembly Name | T.ProtocolDriver.TTagsSender |
| Assembly Version | 1.0.0.7 |
| Available for Linux | False |
| Devices supported | N/A (Not Applicable) |
| Manufacturer | N/A (Not Applicable) |
| Protocol | Proprietary over UDP |
| PC Requirements | Ethernet port |
Nodes Configuration
Station Configuration
Stations syntax: <Host> ; <Port>
Where :
- <Host>: IP Address
- <Port>: UDP port
Points Configuration
Address
String field.
Driver Revision History
| TTagsSender Revision History | |
|---|---|
| Version | Notes |
| 1.0.0.7 | Initial release on new documentation standards |