Versions Compared

Old Version 25

changes.mady.by.user Paulo Tsuchiya

Saved on

compared with

New Version Current

changes.mady.by.user admin

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Overview

The Device AccessType defines the defines the rules Access Types define the specific methods for reading and/or writing values for each Device Point in a solution, including settings such as polling rate, read on startup, and unsolicited input acceptance.In addition, the platform provides On Display Or Server Access Type configurations that enable your solution to control the data read and write permissions. These configurations are useful for solutions with many Device Points but do not require constant data updates, reducing computational load and improving performance. . Each Point is associated with one AccessType.

Settings include among others: Polling Rate, Read on Startup, and if is enabled to do Writing.

On this page:

Table of Contents
maxLevel3
stylenone

Creating an

Access Type

AccessType

To create and configure an Access TypeAccessType, follow these steps:

  1. Access Devices → Access TypesAccessTypes.
  2. Click on the plus icon.
  3. Fill all the property fields with your desired configuration (see the table below for more details about each option).
  4. Click Ok.

Access Types properties

AccessTypes Properties

The following table describes each configuration property when creating an Access TypeAccessType:

Field

Description

Name

Name of this

Access Type

AccessType.

Read

Read Polling

ReadPolling

Enables read polling.

Read Polling Rate

ReadPollingRate

Defines how often the address value is retrieved.

Read Trigger

ReadTrigger

Enter an object property that tells the system when to read the value.

On Startup

OnStartup

When selected, the system reads the value on startup.

Write

Write Events

WriteEvents

Enables the writing of values to the PLC.

Write Event

WriteEvent

Defines when is the value written.

Write Trigger

WriteTrigger

Enter an object property that tells the system when to write the value.

Settings

Accept Unsolicited

AcceptUnsolicited

If enabled, the system accepts values from the PLC, even if the polling time has not yet elapsed.

Use Static Blocks

UseStaticBlocks

Enables the use of the block command field.

Block Command

BlockCommand

A definition for each block that will be created. Check the driver documentation to see if the specific driver uses this field and the valid values.

Description

Description of the access type.


OnDisplayOrServer setting

The OnDisplayOrServer AccessType

On Display Or Server type

The On Display Or Server Access Type is an excellent tool for projects solutions with many communication points but only requires data updates for some of them. It can help computers without the computational power to handle massive data exchange while maintaining other modules active. The On Display Or Server OnDisplayOrServer operation process is divided into two aspects:

  • On Display: On Display means that your Device Point DevicePoint will only begin reading or writing when the solution's display containing these tags is open.
    • Let us imagine a project with two displays, one for Line A and another for Line B. Each display has its specific Tags added to it. When the Project is running, there is no need to send or receive data for all tags in the PLC. The solution only needs to send or receive data for the opened displays of the visualizer. So, when the Line A display is open, only Line A tags will communicate. The same goes for LineB.
  • On Server: OrServer On Server or OPCServer means that if your solution runs as an OPC Server, the Access Type will behave as if its Read Enable property is set to Always. 
    • Suppose you have the tags on the server side as Script TasksScriptTasks, Classes, Expression, or Alarm ItemsAlarmItems. In that case, you must create a new Access Type AccessType specific for them with the Read Enable option in in Always.

Configuring an

Access Type as On Display or Server

AccessType as OnDisplayOrServer

To configure an Access type as On Display Or Server, follow these steps:

  1. Access Devices → Access TypesAccessTypes.
  2. Click on the plus icon.
  3. On the Read PollingReadPolling property, choose On Display Or ServerOnDisplayOrServer. This property is enough for the Reading portion of the communication.
  4. Check the Write EventsWriteEvents box to Enable Writing Events.
Info

Only when these options are met can the Device Points DevicePoints with this Access Type AccessType read/write data.


In this section:

Page Tree
root@parent
spacesV10