| Easy Heading Macro | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
This document has only the specific
information about the device connection settings and its address syntax.
Refer to the User Guide for more information on the Device Module.
On this page:
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
Summary
Communication Driver Information | |
|---|---|
Driver name | Barcode |
Assembly Name | T.ProtocolDriver.Barcode |
Assembly Version | 1.0.2.0 |
Available for Linux | False |
Devices supported | Any equipment compatible with ASCII encoding |
Manufacturer | N/ aA |
Protocol | Serial or TCP/IP |
Protocol Options | BlockSize, Start Char and End Char |
PC Requirements | Standard PC Ethernet interface board, RS485 or RS232 port |
Multi-threading | Only one instance per channel is allowed |
Max number of nodes | Onlye one Node should be used for each channel |
Channels Configuration
Protocol Options
- BlockSize: Defines the maximum length of a single item, the default value is 256.
- StartChar: Determines the character that indicates the message start. When empty, starts receiving the message with any character.
- EndChar: Determines the character that indicates the message end. When empty, stops receiving the message when it reaches the block size length.
Settings
Serial and MultiSerial channels:
- Consult the Serial Port configuration from your equipment
TCP/IP channels:
- ListeningPort: Defines the TCP/IP port that will be listening for the connections.
Settings
Serial and MultiSerial channels:
- Consult the Serial Port configuration from your equipment
TCP/IP channels:
- ListeningPort: Defines the TCP/IP port that will be listening for the connections.
Node Configuration
Primary Station
The PrimaryStation and the BackupStation should be blank.
Point Configuration
The syntax for the Barcode communication points is: <Number of Bytes>
- <Number of Bytes>: means how many bytes (characters) the Tag will receive.
The value 0 (zero) means that the Tag will receive the whole message
E.g.: The message received was “ABCDXYZ”
Case1:
TagName | Address | Value |
TagA | 4 | ABCD |
TagB | 3 | XYZ |
Case2:
TagName | Address | Value |
TagC | 0 | ABCDXYZ |
Driver Revision History
Barcode Revision History | |
|---|---|
Version | Notes |
1.0.2.0 | Initial release on new documentation standards. |
In this section...
| Page Tree | ||||
|---|---|---|---|---|
|