| Easy Heading Macro | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
This document has only the specific information about the device connection settings and its address syntax.Refer to the User Guide for more information on the Device Moduletutorial guides you through the process of setting up the Ping driver to execute pings at a specified frequency, such as every 10 or 30 seconds. It walks you through the steps of creating a new channel with the "Ping - IT Infrastructure" protocol, setting up a new node in this channel, creating a new AccessType, and applying this AccessType to your desired points. By following this process, you can have the Ping driver run automatically at your chosen frequency, with the results conveniently displayed in the TraceWindow. This setup can be particularly useful for regular network health checks and performance monitoring.
Summary
Ping driver is responsible for checking whether an IP address is responding or not by sending a package and receiving it back.
| Communication Driver Information | |
|---|---|
| Driver name | Ping |
| Assembly Name | T.ProtocolDriver.Ping |
| Assembly Version | 1.2.0.0 |
| Available for Linux | False |
| Devices supported | N/A (Not Applicable) |
| Manufacturer | N/A (Not Applicable) |
| Protocol | Proprietary over TCP/IP |
| PC Requirements | Ethernet port |
Configure the Ping Driver
To set up the Ping driver to run at a specified frequency such as every 10 seconds or every 30 seconds, please follow these steps:
Create a New Channel using the “Ping - IT Infrastructure” protocol:
Create a New node on the “Ping” Channel:
Create a new AccessType on Devices > AccessTypes > New item..., and fill in the 'PollingRate' field with your desired frequency.
Go to points and select the AccessType you just created.
Once you've completed these steps, the ping results will be displayed in the TraceWindow at the specified frequency. See below an example configured to ping every 10 seconds:
Anchor Ping Supported Operands Ping Supported Operands
Supported Operands:
| Ping Supported Operands | |
| Ping Supported Operands |
Operand | Read | Write | Data Type | Address size |
AverageTime | Yes | - | Real | 8 bytes |
Lost | Yes | - | Integer | 4 bytes |
Received | Yes | - | Integer | 4 bytes |
MinimumTime | Yes | - | Long | 8 bytes |
MaximumTime | Yes | - | Long | 8 bytes |
Channels Configuration
Protocol Options
- Maximum size of blocks: Defines package size that will be sent.
Settings
- Number of Retries: Defines how many times the package will be sent. When it is zero, the driver uses 4 retries as default.
TimeOut
- TimeOut RxStart: Defines how long the driver will wait for a response in milliseconds.
Nodes Configuration
Station Configuration
TCP/IP:
Station syntax: <IP address>
Where :
- <IP address>: IP address in the network that will be checked for the Ping driver.
E.g.: 192.168.1.1
Points Configuration
The syntax for the Ping address points is: <Property>.
Where <Property> can be:
| Property | Description |
|---|---|
| AvarageTime | Avarage response time (ms) of last execution |
| Lost | Number of lost packages in last execution |
| Received | Number of received packages in last execution |
| MinimumTime | Minumum response time of last execution |
| MaximumTime | Maximum response time of last execution |
Troubleshoot
Possible error codes | |
|---|---|
Error Code | Description |
-1 | The ICMP echo request failed due to an unknown reason. |
1102 | The ICMP echo request failed because the network that contains the destination computer is not reachable. |
1103 | The ICMP echo request failed because the destination computer is not reachable. |
1104 | The ICMP echo request failed because the destination computer that is specified in an ICMP echo message is not reachable, because it does not support the packet's protocol. |
1105 | The ICMP echo request failed because the port on the destination computer is not available. |
1106 | The ICMP echo request failed due to insufficient network resources. |
1107 | The ICMP echo request failed because it contains an invalid option. |
1108 | The ICMP echo request failed due to a hardware error. |
1109 | The ICMP echo request failed because the packet containing the request is larger than the maximum transmission unit (MTU) of a node (router or gateway) located between the source and destination. The MTU defines the maximum size of a transmittable packet. |
11010 | The ICMP echo Reply was not received within the allotted time. The default time allowed for replies is 1 second. You can change this value using the channel configuration. |
11012 | The ICMP echo request failed because there is no valid route between the source and destination computers. |
11013 | The ICMP echo request failed because its Time to Live (TTL) value reached zero, causing the forwarding node (router or gateway) to discard the packet. |
11014 | The ICMP echo request failed because the packet was divided into fragments for transmission and all fragments were not received within the time allotted for reassembly. RFC 2460 (available at www.ietf.org) specifies 60 seconds as the time limit within which all packet fragments must be received. |
11015 | The ICMP echo request failed because a node (router or gateway) encountered problems while processing the packet header. This is the status if, for example, the header contains invalid field data or an unrecognized option. |
11016 | The ICMP echo request failed because the packet was discarded. This occurs when the source computer's output queue has insufficient storage space, or when packets arrive at the destination too quickly to be processed. |
11018 | The ICMP echo request failed because the destination IP address cannot receive ICMP echo requests or should never appear in the destination address field of any IP datagram. For example, specifying the IP address "000.0.0.0" in node configuration returns this error. |
11040 | The ICMP echo request failed because the destination computer that is specified in an ICMP echo message is not reachable; the exact cause of the problem is unknown. |
11041 | The ICMP echo request failed because its Time to Live (TTL) value reached zero, causing the forwarding node (router or gateway) to discard the packet |
11042 | The ICMP echo request failed because the header is invalid. |
11043 | The ICMP echo request failed because the Next Header field does not contain a recognized value. The Next Header field indicates the extension header type (if present) or the protocol above the IP layer, for example, TCP or UDP. |
11044 | The ICMP echo request failed due to an ICMP protocol error. |
11045 | The ICMP echo request failed because the source address and destination address that are specified in an ICMP echo message are not in the same scope. This is usually caused by a router forwarding a packet using an interface that is outside the scope of the source address. Address scopes (link-local, site-local, and global scope) determine where on the network an address is valid. |
Driver Revision History
| <DriverName> Revision History | |
|---|---|
| Version | Notes |
| 1.2.0.0 | Initial release on new documentation standards. |
In this section...
| Page Tree | ||||
|---|---|---|---|---|
|