Page History

Device Module Highlights

• Simplify your architecture by removing the needing for additional communication products (e.g. Kepware / Matrikon)

• Easily setup a communications hub to support comms and logic between practically any device, any database, any historian, anywhere.

• On-Premise, Edge or enterprise level, and to/from the cloud – we have you covered!

• MQTT Broker and OPC Server are both built-in!

• MQTT SparkPlug B and OPC-UA simulators expedite demos and prototyping.

• Driver Toolkit allows our team, or any third-party, to easily add new interfaces.

Key concepts

Channels

The Channel defines a data source connection, using an specific Protocol driver (e.g. Modbus) and an Interface type (e.g. RS-232, TCP/IP).

The Channel may access multiple stations (e.g. field devices, PLC) using the defined protocol and Interface.

Nodes

Each station is called a Node. Each node has one or more data Points.

Points

Points are registers, I/O values or variables residing in field devices (Nodes). Data Points provide the specific values for tags to access. Each data Point is bound to a specific Tag in the Project configuration.

AccessType

Each data point is associated with an AccessType. This defines the rules for reading and writing values for that data point, such as the polling rate, whether a read is performed on startup, and whether you write values to that data Point.

Configuration Workflow

The typical configuration workflow for the Device Module has the following sequence:

Creating Channels

To create channels:

• Go to Edit → Devices → Channels.

• Click Create New.

• The Create New Channel window displays.

• Enter or select information, as needed.

• Click OK. The channel is added as a new row in the table

To edit device channels:

• Go to Edit → Devices → Channels.

• To add or remove a column, right-click the column heading area and select or deselect columns.

• Edit the fields on the row corresponding to the channel you want to modify.

Protocol Drivers

Native Protocols vs OPC

What are the benefits of supplying native protocols interfaces to PLCs, instead of just use OPC client and rely on external OPC server to get the date?

Some PLCs are using OPC UA as their native built-in protocol, certainly this question does apply to them, but to other equipments using proprietary protocols. 

There are many scenarios when the native driver is more beneficial. Let us explore some of them:

Higher Performance

Instead of a direct connection, invariably adding one more application in the middle cause additional lag time. Further, the AccessTypes and the ability of parles execution (multi-threading) available in the Device Module allows optimized configuration not available in most OPC servers.

Cost Reduction

Most of the native drivers are included at no charge. The exceptions when there is a cost, it is typically quite smaller than the OPC server cost.

The OPC server still needs to use the Native Protocol Addresses

One misleading argument to use OPC is to hide the PLC address from the configuration. The reason it is misleading is that you need to use the native PLC address to setup the configuration of the OPC server anyway; you just duplicated the work load.  

The exception here is if the OPC Server is already installed and serving multiple applications. In this case, the connection using the OPC Client to the centralized OPC server is recommended.

Another good option is to leverage the OPC Server included in the Module device for the Edge application. In this case, the project connects with the field device with the native protocol, still enabling its OPC Server functionality, so other applications can use the built OPC Server in the FrameworX to access the data. 

Easier Field Maintenance and Deployment 

As explained on the previous item, if the OPC Server was not in its place, adding one more "middle-man" is just stressing the deployment and maintenance procedures.

Improved technical support  

Two points for potential failure or misconfigurations, and two independent suppliers, typically do not compare with a single environment and centralized support.

Available Communication drivers

The up-to-date list of Communication drivers is publics at docs.tasoft.com at the Communication Drivers section.

Additional driver can be created using the Drivers Toolkit.

Creating Nodes

Nodes are the devices or PLCs on the network that you communicate with. You can enter the settings for your nodes as usual through the Engineering Workspace. You can also import settings from an OPC server or from another data source. See "Importing PLC Addresses" below.To configure nodes:

• Go to Edit → Devices → Nodes.

• Enter or select information, as needed.

• To add or remove a column, right-click the column heading area and select or deselect columns.

Creating Points

Data Points define specific values for each node that can be accessed using tags. The number of data points you can configure is related to both the ProductModel that is configured for the project and your software license. 

To configure data points:

• Go to Devices → Points.

• You can copy and paste tags from the Tag → Objects.

• Enter or select information, as needed.

• To add or remove a column, right-click the column heading area and select or deselect columns.

  Device Points Configuration Properties
  Field/Column	Description
  TagName	Enter a tag name or click "..." to select a tag. You can also create a new tag.
  Node	Select the node for this data point.
  Address	Enter the register address which is based on the PLC and protocol for this data point and tag. Note The Protocol options are dependent upon which protocol is selected. Select the protocol from the dropdown list at the top of the page, and press the HELP button to access the specific protocol's documentation.
  DataType	Select the data type you want to use. Most protocols should use the native option. When native is used, the protocol will automatically handle the data conversion. Selecting a different data type overrides the defaults. Some options may not be applicable to the selected node. Make sure you know the applicable data types.
  Modifiers	If the PLC uses a different byte order, select the options you want. You can change the position bit, byte, Word, or Dword of the data that is communicated.
  AccessType	Select the access type for this data point. You can define and configure the access types. See Access Types below.
  Scaling	If you want to manipulate the tag value, select the options you want. When the data is read in the Equation option: Div - The system will divide the register value by what you enter here.  Add - The system will add the amount you enter here as an offset of the result of the division.  For a write operation, the calculations are the opposite (multiple by the Div value, then subtract the Add value).
  Label	A text that represents a label on the point

  
  

Importing PLC Addresses

When creating communication nodes and data points, you can import them if they are defined in another data source in the following ways:

• You can copy and paste the contents of a table from Excel. The tables can have different columns or order, as long you include the title of the column in the copy and paste operations. The system will put the data in the expected columns, even if the order is different in the source and target tables.

• You can import the data from csv files.

• For Rockwell ControlLogix devices, you can import from L5k definition files.

• You can use various Import Wizards from many data sources

• For OSIsoft® PI database, there is a FactoryStudio version to share definitions.

• A programming API is available that can populate the tables from code, even from runtime execution when it is necessary.

Access Types Configuration

Access types define the specific methods for reading and writing the values of each data point. This could be the polling rate, whether or not a read is performed on startup, and whether or not unsolicited input is accepted. FactoryStudio comes with a few predefined access types that you can use, or you can create your own.

To configure access types:

• Go to Devices → AccessTypes.

• Do one of the following:

• To edit an existing access type, double-click a field.

• To create a new access type, click Create New.

• Enter or select information, as needed.

  
  

  Device AccessType  Configuration Properties
  Field/Column	Description
  Name	Enter a name for this access type.
  Read
  ReadPolling	Select when you want to enable read polling.
  ReadPollingRate	Enter how often the address value is retrieved.
  ReadTrigger	Enter an object property that tells the system when to read the value.
  ReadOnStartup	When selected, the system reads the value on startup.
  ReadStatus	Enter an object property that receives the status of the read communication.
  ReadCompleted	Enter an object property that receives an indication that the reading is completed. The value will change between 0 and 1 every time a reading is completed.
  Write
  WriteEventEnable	Select to enable the writing of values to the PLC.
  WriteEvent	Select when the value is written.
  WriteTrigger	Enter an object property that tells the system when to write the value.
  WriteStatus	Enter an object property that receives the status of the write communication.
  WriteCompleted	Enter an object property that receives an indication that the writing is completed. The value will change between 0 and 1 every time a writing is completed.
  Settings
  AcceptUnsolicited	When selected, the system accepts values from the PLC, even if the polling time has not yet elapsed.
  UseStaticBlocks	Select to use the block command field
  BlockCommand	Enter a definition for each block that will be created. Check the driver documentation to see if the specific driver uses this field and the valid values.
  Description	Enter a description for the access type.

  
  

One very efficient AcceesType is to read data when it is being used by the application. Go to the section OnDisplayOrServer for more information.

Anchor
Using Diagnostic Tools Using Diagnostic Tools

Using Diagnostic Tools

After you start the project in the Startup window, select the diagnostic tools. These are: PropertyWatch (Watch), TraceWindow (Trace), and ModuleInformation (Info). 

You can also start the diagnostic tools on the Run → Test and Run → Startup pages by left-clicking the desired tool's icon. If menus are enabled for the display, you can also access the tools menu. 

Module Information

The Module Information tool provides information about the operation of the modules. If you choose the devices module and a specific channel, you will see information regarding the function of the communication channel. 

The "Read Groups Information" is important because it provides information about the virtual reading groups, the run time of each item, the quantity of the readings, and the readings that have failed. It also reports on the code and date/time of the last error. 

These are the typical steps to use the Module Information tool:

• Go to Read Groups Information to look at the number of successful and failed communication events and in order to quickly identify the communication blocks.

• If you have systematic errors in all of the blocks or status codes with negative values, it typically means you cannot access the remote device. Check if the node address is right.

• If you have specific blocks with systematic errors, verify the tags and addresses that are connected to the blocks. Use the TraceWindow with the Device information to collect information about the communication errors.

• For some protocols, like OPC, the discarded items will show as a wrong addresses in the configuration.

Keep in mind that you can only READ from a field device when an Enterprise application is running in test mode. This makes it useful to run the application with ONLINE CONFIGURATION enabled because you do not need to start and stop the driver when modifying the configuration. You can modify PLC addresses, AccessTypes, and most of the application, and you can see the results in real-time on your running application. You can use the Startup window or the PropertyWatch tool to start and stop only one module, instead of restarting the entire runtime system. 

Property Watch

Property Watch is a diagnostic tool used to access the tags and internal properties of the system for reading or writing. Type the name of the property in the Object column, and its value will be found in the Value column.

For example, in the screen shown above, select Tag.Coils or Device.Channel.modbus.Status . The value of these objects will be shown. To the right side, additional properties are displayed for the selected object. 

Trace Window

The Trace Window tool displays system messages in a data grid interface. If you enable the module devices in the settings, information will be available about the status of reads, writes, unsolicited input, TX frames (sent), and RX frames (received).

When checking the devices CheckBox in the Settings, enable only the ERROR, INFO, and Warning information. Do not enable the Debug information, or you will create too much data. For ControlLogix devices, it is very important to use this tool, as the system will present here the invalid addresses on the configuration.

If you click the settings button in the configuration dialog, you can select which message types and modules to display. You can see the data in the data grid or save it to a file. It is also possible to configure a tag in ObjectName, and click the Add button to display a menu to select that object and include it in the monitoring.

The Device Namespace

The Device namespace is the entry point for all objects related to the device module.

The Device.Channel object lists all of the configured channels and their runtime properties.

The Device.Node object lists all of the configured nodes and their runtime properties.

The Device.AccessType object lists the defined access types and has options to execute synchronous calls on reading and writing to the device. 

The following tag properties are updated based on the device module:

In this section...