| Easy Heading Macro | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
This document has only the specific
information about the device connection settings and its address syntax.
Refer to the User Guide for more information on the Device Module.
On this page:
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
Summary
Transverter driver implements communication with devices compatible with the Transverter library. The communications blocks are dynamically created according to the pooling cycle defined on the AccessType for each Device Point.
Communication Driver Information | |
|---|---|
Driver name | Transverter |
Assembly Name | T.ProtocolDriver.Transverter |
Assembly Version | 1.1 |
Available for Linux | True |
Devices supported | Any device compatible with Transverter library |
Equipments supported | T13x and HT2000 |
Manufacturer | N/A (Not Applicable) |
Protocol | Trasverter |
Interface | Trasverter library |
PC Requirements | Raspberry PI |
Points Configuration
The syntax for the Transverter communication points is: <Equipment>:<Property>:<Line/Relay/Module>
Where:
- <Equipment>: T13x or HT2000
- <Property>: LineCurrent, LineFrequency, etc. [See Transverter Library manual]
- <Line/Relay/Module>: Optional number [See Transverter Library manual]
E.g.: T13x: LineFrequency, HT2000:MaxV190:0
Driver Revision History
Transverter Revision History | |
|---|---|
Version | Notes |
1.1 | Initial release on new documentation standards. |
In this section...
| Page Tree | ||||
|---|---|---|---|---|
|