Overview
Each device connected to the system through channels is called a Node. Nodes can be individual Nodes are the devices or PLCs on the network with which you communicate. They can be both individual devices or groups of devices. Each , and each node contains one or more Points. improve the overviewPoint adresses. This page explains how to create nodes and also how to import them from various sources.
On this page:
Table of Contents maxLevel 3
Creating Nodes
To create a new node follow these steps:
- Access Devices → Nodes.
- Click the plus icon to add a new node.
- Select a channel to associate the node, and fill its name and description.
- Click Ok.
The node is now created. To configure it, in the list double click the property you want to edit on the row corresponding to the channel you want to modify.
| Info |
|---|
If the column Remote settings column is not visible on the grid, enable it by right-clicking the grid header, and selecting it from the list. |
The following table describes each available property you can configure when editing a node:
Configuration Workflow
This information was presented before
The typical configuration workflow for the Device Module has the following sequence:
Device Module Configuration Workflow
Action
Where
Comments
Create Channels
Devices → Channels
Identify the required field devices and protocols the project requires, create channels accordingly.
Create Nodes
Devices → Nodes
Identify the Network addresses and relevant information to all stations and devices that need connectivity. Learn more at Devices Nodes.
Map Tags to Point addresses
Devices → Points
Optionally, you can Copy Tags from Excel/CSV from Excel or execute Import Wizards. Learn more at Device Points.
Create or Customize AccessTypes
Devices → AccessTypes
Optionally, you can optimize the communication, grouping Points with similar requirements to the same AccessType. Learn more at AccessType.
Creating Nodes
Nodes are the devices or PLCs on the network with which you communicate and this is where you must enter the settings for each one that will be connected to your project.
You can also import settings from an OPC server or from another data source.
To configure nodes:
Go to Devices → Nodes.
Enter or select information, as needed.
To add or remove a column (visualization only), right-click the column heading area and select or deselect columns.
Device Node Configuration Properties | |||
|---|---|---|---|
Column | Description | ||
Name | Enter a name for the node. The system lets you know if the name is not valid. | ||
Channel | Select the channel for this node. For more information about the configuration for common protocols, click Help at the top of the tab. | ||
PrimaryStationPrimary Station | Enter the information required to access the primary node, based on the protocol selected. | ||
BackupStationBackup Station | Enter the information required, based on the protocol, to access the backup node. When the backupstation is defined and a communication failure occurs on the primary station, the system automatically attempts to establish communication with the backup station. | ||
SyncDateSync Date | Date that the import was done (read only field). | ||
SyncStationSync Station | Information about the station where the import was done - Station IP, Port and Slot - (read only field). | ||
SyncSettingsSync Settings | Information about the settings used by the system to import the file (read only field). | TemplateID | |
Description | Enter a description for this node. | [Other columns] | For definitions of other columns that are available in many tables, see Common Column Definitions. |
Standarize the table
Importing PLC Addresses
When creating the communication nodes and point addresses, there is no need to retype those addresses if they are already defined in some other data source. Currently, Tatsoft supports the following methods to automatically import remote data configuration:
You can copy and paste the contents of a table from Excel. The tables can have different columns or order, as long you include the TITLE of the column in the copy and paste operations. The system will put the data in the expected columns, even if the order is different in the source and target tables.
You can import the data from CSV files.
For Rockwell ControlLogix devices, you can import from L5k definition files.
You can use various Import Wizards from many data sources
For OSIsoft® PI database, there is a FactoryStudio version to share definitions.
A programming API is available that can populate the tables from code, even from runtime execution when it is necessary.
If your PLC or Field Device has an open database of file with the available addresses, and you would like to have a tied integration with that configuration and addresses, contact us, as we have programming interfaces to allow that just like we did with the OPC datasources.
For more information, visit Import Tag Wizards.
Importing from an OPC Server
Importing data from an OPC server allows for efficient and streamlined integration with industrial automation systems. By creating an OPC communication node and selecting the "Import" option, FactoryStudio automatically creates tags and communication points based on the information available from the OPC server. This functionality simplifies the configuration and maintenance of the project, optimizing the data integration process. To learn more about importing data from an OPC server, please visit Import Tag Wizards - OPC Server.
Tutorial -Importing from an OPCXmIDA
The Importing from OPCXmIDA tutorial guides you through the process of configuring a Kepware server and a client, establishing an efficient OPC connection between the two systems. By following the steps outlined in the tutorial, you can create and configure devices, tags, and OPCxmIDA communication nodes in both Kepware and our software. Additionally, the tutorial covers how to change the visibility property of the tags to ensure proper communication between the OPC server and client. For detailed, step-by-step information on importing from OPCXmIDA, please visit Tutorial - Importing from an OPCXmIDA
Importing from Excel
The import and export of tags and PLC addresses is streamlined due to its integration with Excel, as the software extensively utilizes tables in various features. By creating a table in Excel with the required columns, such as TagName, Type, and Address, you can copy and paste the data directly into platform. The software ensures the accurate assignment of data to the corresponding columns, even if the column order is different. After the first import, the system stores your settings, making it easy to synchronize previously imported addresses and new addresses. For more detailed information on the import and export process of tags, visit Import Tag Wizards -Importing from Excel.
In this section:
| Page Tree | ||||
|---|---|---|---|---|
|
...