Page Tree


Previous Releases

FactoryStudio 8.1

Skip to end of metadata
Go to start of metadata

For a generic explanation on Device Module, Channels, Nodes, and Points configuration, please refer to the reference guide.

Summary Information

Communication Driver Name: TSimulator - SCADA Random Values

Current Version: 1.0.0.0

Implementation DLL: T.ProtocolDriver.TSimulator.dll



Channel Configuration

Protocol Options: Not used in this driver

Node Configuration: Not used in this driver

Point Configuration

The syntax for the TSimulator communication points is: <Type>:<Min>;<Max>

Where Type: Represents the Simulation Type:

  • BOOL;
  • INTEGER;
  • FLOAT;
  • STRING;
  • RAMP;
  • SINE;


For the STRING simulation type, the StringLength can be configured in the Modifiers column.

Example Points Configuration

TagName

Node

Address

DataType

AccessType

Modifiers

MySine

SimulatorNode

SINE:-50;50

Native

Read


MyRamp

SimulatorNode

RAMP:0;100

Native

Read


MyString

SimulatorNode

STRING:

Native

Read

StringLength=5

MyBool

SimulatorNode

BOOL:

Native

Read


MyInt

SimulatorNode

INTEGER:0;10

Native

Read


MyFloat

SimulatorNode

FLOAT:-500;-100

Native

Read




Troubleshoot

The driver execution status can be observed through the diagnostic tools, which are:

  • Trace window
  • Property Watch
  • Module Information

A status value of 0 (zero) means the communication is a success. Negative values indicate an internal driver error and positive values mean there are protocol errors.


  • No labels