Summary Information

Communication Driver Name: SNMP

Implementation DLL: T.ProtocolDriver.SNMP.dll

Protocol: SNMP

Interface: TCP/IP or UDP

Addition Assemblies: SharpSnmpLib.dll and SharpSnmpLib.Mib.dll

Supported Operands:

Get Command

• • OctetString (FS Device Datatype ASCII)
  • ObjectIdentifier (FS Device Datatype ASCII)
  • TimeTicks (FS Device Datatype ASCII)
  • Integer32 (FS Device Datatype Long)
  • Gauge32 (FS Device Datatype DWord)
  • Counter32 (FS Device Datatype DWord)

Set Command

• • OctetString (FS Device Datatype ASCII)
  • Integer32 (FS Device Datatype Long)
  • Counter32 (FS Device Datatype DWord)

Node Configuration 

Station Configuration

<IP address> = The IP address of the equipment in the network

<Port> = The Port of the equipment in the network

<MIB> =  TheMIB file of the equipment. If the MIB file is not specified, the SNMPv2-MIB file will be used

<Version> = The Version of the SNMP

<Authentication> = Authentication MD5 or SHA-1. Only for Version 3

<Passphrase> = The passphrase when Authentication is enabled

<Privacy> = Privacy DES or AES. Only for Version 3 and Authentication is enabled

<Passphrase> = The passphrase when Privacy is enabled

<UserName> = The username for version 3

Point Configuration

The syntax for the SNMP communication points is: [Community name];<OID>

Where:

• [Community name] = Public (default) or Private
• <OID> indicates the Object Identifier (OID) in the verbose notation. You can use the TreeView to select the OID from MIB

E.g.: .iso.org.dod.internet.mgmt.mib-2.transmission

Troubleshoot

The status of the driver's execution can be observed through the diagnostic tools, which are:

• Trace window
• Property Watch
• Module Information

The above tools indicate if the operations have succeeded or have failed. A status of 0 (zero) means communication is successful. Negative values indicate internal driver errors, and positive values indicate protocol error codes.